3-2-3. Amplifier
Left OCC camera
assembly
F10R Amplifier
3-2-4. Assembling the Fiber Unit to the Amplifier (F10R Amplifier)
Make the projection on the fiber unit facing toward a position where the LED does not exist on the
amplifier and insert it completely until it is in contact with the far side.
After the fiber has been inserted until it is in contact with the far side, turn the connector clockwise
to check that the fiber unit cannot be removed.
Maintenance Guide
Left OCC camera
assembly
Camera bracket
Bad mark sensor
amplifier
F10R
Washer assembled
hexagon socket
head cap bolt ×2
F70R Amplifier(after M/C Rev. M)
Figure 3-2-2 Mounting the Amplifier
F10R amplifier
Figure 3-2-3 Assembling the Fiber Unit
Camera bracket
Amplifier bracket
Bad mark sensor
amplifier
F70R
Hexagon socket
head cap screw with
a spring washer ×2
Washer assembled
hexagon socket
head cap bolt ×2
F70R Amplifier (before M/C Rev. L)
Projection
Fiber unit
3-3
Left OCC camera
assembly
Camera bracket
Bad mark sensor
amplifier
F70R
Washer assembled
hexagon socket
head cap bolt ×2