JUKI KE-3010 Maintenance Manual page 253

2) "Main" screen
The "Main" screen displays the contents shown below.
Main
BIOS Version:
System Time:
System Date:
Legacy Diskette A:
IDE Channel 0 Master [4094MB]
IDE Channel 0 Slave [None]
SATA Port 0
SATA Port 1
System Memory
Extended Memory
F1 Help
Esc Exit
3) Changing the "Legacy Diskette A" setting
Change the drive type assignment.
Select "Disabled" and press the <ENTER> key.
4) Moving to the "Advanced" screen
Move the cursor to "Advanced" with the <←> or <→> key.
5) "Advanced" screen
The "Advanced" screen displays the contents shown below.
Main
Reset Configuration Data:
Large Disk Access Mode:
Local Bus IDE adapter:
Legacy USB Support:
Summary Screen:
Boot-time Diagnostic Screen:
QuickBoot Mode：
Extended Memory Testing:
PXE OPROM：
Keyboard Features
PnP Configuration
CPU Control Sub-Menu
ICH Control Sub-Menu
SIO Control Sub-Menu
F1 Help
Esc Exit
Maintenance Guide
Phoenix TrustedCore (tm) Setup Utility
Advanced Security
r1.08
[11:17:51]
[02/01/2011]
[Disabled］
[None]
[None]
640 KB
514048 KB
↑↓Select Item -/+
Select Menu Enter
Figure 13-2-2-1-2 BIOS Screen (Main)
Phoenix TrustedCore (tm) Setup Utility
Advanced Security Boot
[No]
[DOS]
[Primary]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Just Zero it]
[Disabled]
↑↓Select Item -/+
Select Menu Enter
Figure 13-2-2-1-3 BIOS Screen (Advanced)
Boot Exit
Item Specific Help
<Tab>,<Shift-Tab>, or
<Enter> Selects field.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
Exit
Item Specific Help
Select 'Yes' if you
Want to clear the
Extended System
Configuration
Data (ESCD) area.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
13-8
Rev. 2.0