Replacing The Cylinder Sensor For Drive Cylinder Unit Up/Down (Specifications Common To Optional Electric And Mechanical Replacement Tables) - JUKI KE-3010 Maintenance Manual

9-1-7. Replacing the Cylinder Sensor for Drive Cylinder Unit Up/Down
(Specifications Common to Optional Electric and Mechanical Replacement
Tables)
1) Disconnect the cables from the sensor assembly.
2) Remove the screws for the sensor fixing bands to detach the sensor assembly.
3) Reassemble a new sensor assembly in the reverse order of disassembly.
4) Adjust the sensor position so that the sensor is turned ON when the drive cylinder moves up
to its upper limit.
(Secure the sensor position at the intermediate position of the sensor ON range.)
Maintenance Guide
9-11
[Front side (FL)]
40092513
DRIVE CYL SENSOR F ASM
[Rear side (RR)]
40092514
DRIVE CYL SENSOR R ASM
Rev. 2.0