JUKI KE-3010 Maintenance Manual page 263

4) The folder named "machine" is then created under the D drive. In the same manner as
described above, create "Prg" folder under the machine folder.
5) Click the created "Prg" folder with the right button, and select the [Sharing and Security] or
[Properties] command.
6) The "Prg Properties" dialog box appears on the screen. Click the
dialog box, and select the
entered as the "Share Name."
• If "Prg" is not entered in the "Shared Name" field, change the entered name to "Prg."
• If any name is not entered, select the "Maximum Allowed" radio button for the "User
Limit" item.
Maintenance Guide
"Share this folder" radio button to check to see if "Prg" is
13-18
"Sharing" tab from this
*Note
Set up a shared folder so
that the shared folder name
"prg" is not duplicated in the
computer.
If a shared folder named
"prg" already exists, change
the name of the previously
existing folder name to that
other than "prg".
Rev. 2.0