JUKI KE-3010 Maintenance Manual page 353

15-2. Assembling to the Machine Main Unit
15-2-1. Mounting the AWC Bracket Assembly
∗ When viewed from the front, the PCB transport unit is installed in such a way that the rear
reference is replaced by the front reference, so the bracket assembly needs to be mounted
in the position shown below.
Part No.
-
SL6051492TN
40000769
E2160725000
Rear reference
Front reference
∗ Adjust the timing belt tension by moving the motor
position to the right and left so that the belt sags 1. 63
mm in the case of M-size (1.76 mm in the case of
L-size) when the center A on the belt span is pressed
with a force of 1.67N.
Maintenance Guide
Part name
AWC bracket assembly
SCREW M5 L=14
AWC PULLEY B ASM
AWC BELT (E)
Figure 15-2-1-1
15-2
Q'ty
1
2
1
1
Figure 15-2-1-2
Rev. 2.0