JUKI KE-3010 Maintenance Manual page 233

8) Turn OFF the lock of the safety cover through the operation screen to release the safety
cover and move up the SC_LOCK_BRACKET
At this time, be careful not to move up the bracket excessively.
When the bracket is moved up excessively, the conditions may become those stated in 6)_c).
The reference position is the center of the slotted hole.
After the position has been adjusted, return to step 5) and proceed the work.
9) Turn OFF the lock of the safety cover through the operation screen to release the safety
cover and move down the SC_LOCK_BRACKET
At this time, be careful not to move down the bracket excessively.
When the bracket is moved up excessively, the conditions may become those stated in 6)_b).
The reference position is the center of the slotted hole.
After the position has been adjusted, return to step 5) and proceed the work.
Maintenance Guide
11-8
.
SC_LOCK_BRACKET
Reference: Center of slotted hole
.
Rev. 2.0