Assembling The Cable - JUKI KE-3010 Maintenance Manual

1-6-6. Assembling the Cable

1) Apply the GERALYN grease (MGREAS400GA) to portions where the cables (XY
veyor-cable (XY veyor-cable XL), 1394 robot cable and the optical fiber cable 7M) are put in
the cableveyor.
2) Arrange the cables as shown in Figure 1-6-6-1 and adjust their lengths.
5-gang XY veyor-cable
assembly
(40113621)
Y cableveyor assembly
(40113623)
XY veyor-cable
assembly XL
(40092637)
Y veyor-cable
assembly XL
(40092638)
Maintenance Guide
1-gang XY veyor-cable
assembly (40113622)
(KE-3020VR specifications)
Cover side
Outlet on cableveyor head side, M:L specifications
Figure 1-6-6-1-1
Cover side
Outlet on cableveyor head side, XL specifications
Figure 1-6-6-1-2
1-41
Air tube (black, φ8)
(40054839)
1600mm × 2
Head
side
Air tube (blue, φ6)
(BT0600400EC)
1600mm × 2 pcs.
Air tube (black, φ8)
(40054839)
1600mm × 2
Head
side
Air tube (blue, φ6)
(BT0600400EC)
1600mm × 2 pcs.
Rev. 2.0