JUKI KE-3010 Maintenance Manual page 255

15) Changing "PCI IRQ G"
Move the cursor to "PCI IRQ G" and change the numeric value to "10".
16) Changing "PCI IRQ H"
Move the cursor to "PCI IRQ H" and change the numeric value to "5".
17) Exiting the "PnP Configuration" screen
Press the <Esc> key to return to the "Advanced" screen.
18) Changing "Boot"
Move the cursor to "Boot" with the <←> or <→> key.
19) "Boot" screen
The "Boot" screen displays the contents shown below.
Main
Boot priority
1: USB FDC:
2: USB CDROM:
3: IDE CD:
4: UDE HDD: MS9732FMD040AY-(PM)
5: PCI SCSI:
6: USB KEY:
7:
8:
Excluded from boot order:
: Legacy Floppy Drives
: USB HDD:
: USB ZIP:
: USB LS120:
: PCI BEV:
: Other USB:
: PCI
F1 Help
Esc Exit
20) Changing "Boot priority" and "Excluded from boot order"
Set "Boot priority" and "Excluded from boot order" as shown in Figure 13-2-2-1-5.
Move the cursor to an item you want to move with the <↑> or <↓> key and press the <+> or
<-> key to move the item up or down.
Move the cursor to the item and press the <X> key to move this item between "Boot priority"
and "Excluded from boot order".
21) Changing "Exit"
Move the cursor to "Exit" with the <←> or <→> key.
Maintenance Guide
Phoenix TrustedCore (tm) Setup Utility
Advanced Security Boot
↑↓Select Item -/+
Select Menu Enter
Figure 13-2-2-1-5 BIOS Screen (Boot)
Exit
Item Specific Help
Keys used to view or
configure devices:
Un and Down arrows
select a device.
<+> and <-> moves
the device up or down.
<f> and <r> specifies
the device fixed or
removable.
<x> exclude or include
the device to boot.
<Shift + 1> enables or
disables a device.
<1-4> Loads default
boot sequence.
Change Values F9 Setup Defaults
Select Sub-Menu F10
13-10
Save and Exit
Rev. 2.0