15-4. Bundling the Support Pin Detection Sensor
15-4-1. Mounting the Support Pin Detection Sensor (Bundling the Cables)
Rail plate RL
Tie-up band
HX00522000
Spiral tube
0.5 m
(To circuit board)
Change the rail width between the maximum and minimum levels to check that the cable does
not interfere with other objects.
Maintenance Guide
Rail plate RR
Tie-up band
HX003140000
Spiral tube
0.5 m
Base bar
Figure 15-4-1-1
Fix the cable with the tie-up band
(To circuit board)
put in holes in the rail plates RR
and RL.
Wind the spiral tube
(HX005220000) at the top of the
cable fixed by the tie-up band.
15-6
Rev. 2.0