JUKI KE-3010 Maintenance Manual page 295

3) The "Coplanarity" dialog box will appear.
Input the IP address and subnet mask for the coplanarity CPU board set on the coplanarity
CPU board in the [IP address] and [Subnet mask] fields in the "Coplanarity Network Setup"
area. Click the [OK] button to exit the coplanarity setup. Subsequently, save the machine
setup to exit the machine setup.
DANGER
Maintenance Guide
Do not set the IP address and subnet mask prepared for the mounter.
Be sure to set the IP address and subnet mask set on the coplanarity
CPU board.
If incorrect IP address or subnet mask is set, the communication is
not established. In this case, when the mounter is started up, the
communication error occurs and the coplanarity inspection cannot be
performed.
13-50
Rev. 2.0