Ip-X7 Base Asm (40071283), Ip-X7 Sub Asm (40071293) - JUKI KE-3010 Maintenance Manual

14-3-6.

IP-X7 BASE ASM (40071283), IP-X7 SUB ASM (40071293)

[Functions]
This IP-X7 board is an image processing board
that processes image data, such as board mark
and IC mark captured by the OCC camera to
calculate values necessary for correction of the
board position and/or part position.
[DIP-switch settings]
The DIP-switches have been set properly at the delivery of the machine. When setting the
board in the control unit, check the DIP-switch settings. ( portions show the switch positions.)
∗ SW2 is a piano type switch, which is operated from the front panel.
Figure 14-3-6-1 DIP-Switches on IP-X7 BASE Board Assembly
SW1-1 ：OFF
SW1-2 ：OFF
SW1-3 ：OFF
SW1-4 ：OFF
SW1-5 ：OFF
SW1-6 ：OFF
SW1-7 ：OFF
SW1-8 ：OFF
SW5-1 ：OFF
SW5-2 ：OFF
SW5-3 ：OFF
SW5-4 ：OFF
SW5-5 ：OFF
SW5-6 ：OFF
SW5-7 ：OFF
SW5-8 ：OFF
Figure 14-3-6-2 DIP-Switches on IP-X7 SUB Board Assembly
[Front panel switches]
RESET SW: Resets this board.
ABORT SW: Issues NMI to the CPU.
DIP-switch: Changes the settings of the board.
[Adjustment items after replacement]
After that, follow the steps below to update the FLASH memory.
Select [Options] and [Change User Group], and then select [Serviceman].
Select [Maintenance] and [MS Parameter Setup].
Select [Upgrade] and [Display].
Clicking [Exec.] will start the upgrading process.
Maintenance Guide
SW1-1 ：OFF
SW1-2 ：OFF
SW1-3 ：OFF
SW1-4 ：OFF
SW1-5 ：OFF
SW1-6 ：OFF
SW1-7 ：OFF
SW1-8 ：OFF
SW2-1 ：OFF
SW2-2 ：OFF
SW2-3 ：OFF
SW2-4 ：OFF
SW8-1 ：OFF
SW8-2 ：OFF
SW8-3 ：ON
SW8-4 ：ON
∗
Basically, do not operate these switches.
14-24
SW2-1 ：ON
SW2-2 ：OFF
SW2-3 ：OFF
SW2-4 ：OFF
SW3-1 ：ON
SW3-2 ：ON
SW3-3 ：ON
SW3-4 ：ON
SW3-5 ：OFF
SW3-6 ：OFF
SW3-7 ：OFF
SW3-8 ：ON
Rev. 2.0
SW4-1 ：OFF
SW4-2 ：OFF
SW4-3 ：OFF
SW4-4 ：OFF
SW4-5 ：OFF
SW4-6 ：OFF
SW4-7 ：OFF
SW4-8 ：OFF