JUKI KE-3010 Maintenance Manual page 92

(4) Remove the lock nut and spacer on the rear.
∗ Be careful not to drop the set piece. The set piece and lock nut are used as a set.
[Lock nut (Part No.: 40093876)]
(5) Pull out the Y_BEARING_ASM from the Y_BS_FRAME.
Y_BS_FRAME
Adjustment
value
White marker
Maintenance Guide
Set piece
Rear L indication
[To use the Y_BEARING_ASM later, check the
following items.]
When pulling out the Y_BEARING_ASM, check that
the rear L indication (rear R indication) and the
adjustment value are written, and that the white
marker is put.
∗ If the rear L indication (rear R indication), the
adjustment value, and the white marker line are
paled out, write them again.
Spacer
Spacer (Part No.: 40093877)
Lock nut (Part No.: 40093876)
1-81
Rev. 2.0
Lock nut
Y_BEARRING_ASM