Changing The Ip Address Of The Coplanarity Cpu - JUKI KE-3010 Maintenance Manual

13-4-2. Changing the IP Address of the Coplanarity CPU

When setting the IP address of the coplanarity CPU, make the setting while referring to the
cautions on TCP/IP setup in section 13-2-3, Setting Up the Network (setup required when
communicating with the IS.).
13-4-2-1. Required Components
Mouse and keyboard (PS2)
Another one set of generally available PS2 connection mouse and keyboard or mouse
(40080173) and keyboard (40003284) mounted on the mounter is required.
13-4-2-2. Making Preparations for the Setup
1) Make sure that the power to the mounter turns OFF, and then connect the mouse and
keyboard you have prepared to the coplanarity CPU (40097624) in the control unit.
2) Detach the rear cover. Change the change-over switch on the coplanarity monitor
change-over PCB (40097434) in the direction indicated by an arrow.
Maintenance Guide
13-45
Rev. 2.0