Mouse/Keyboard Selector (40003281) - JUKI KE-3010 Maintenance Manual

14-3-7.

MOUSE/KEYBOARD Selector (40003281)

[Functions]
This MOUSE/KEYBOARD selector is intended
to switch between the keyboard and mouse
console.
[DIP-switch settings]
The DIP-switches have been set properly at the
delivery of the machine. When setting the board
in the control unit, check the DIP-switch settings.
( portions show the switch positions.)
Figure 14-3-7-1 MOUSE/KEYBOARD SELECTOR DIP-SW
[Meaning of LED]
There are no LEDs on the MOUSE/KEYBOARD selector.
[Adjustment items after replacement]
There are no particular adjustment items.
[Replacement procedure]
Before starting the replacement work, always turn OFF the main power, main circuit
breaker, and main switch.
Since the MOUSE/KEYBOARD SELECTOR is assembled into the PCB support located at
the lower portion of the control box, take out the PCB support and replace it.
After the PCB support has been taken out, remove SL4030691SC (4 pcs.) to detach the
KEYBOARD/MOUSE selector (40003281).
Replace the detached MOUSE/KEYBOARD selector with a new one and reassemble the
parts and components in the reverse order of disassembly.
Maintenance Guide
SW-1 ：ON
SW-2 ：OFF
SW-3 ：OFF
SW-4 ：OFF
14-25
Rev. 2.0