Fig 6-66 Elevator Drive Assembly And Motor Assembly-Md11; Rrp 6-80 Elevator Drive Assembly And Motor Assembly-Md11 (Pl 20.14) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 6-80 Elevator Drive Assembly and Motor
Assembly-MD11 (PL 20.14)

Fig 6-66 Elevator Drive Assembly and Motor Assembly-MD11

Removal
1.
Remove the Jogging Cover (RRP 6-14).
2.
Remove the Stacker Bin.
3.
Remove the Front and Rear Top Cover (RRP 6-16).
4.
Remove the Rear Cover (RRP 6-21).
5.
Remove the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
6.
Remove the
Right Cover (RRP 6-81).
7.
Remove the
Latch Assembly and Switch Docking (RRP 6-19).
8. Remove the
Inner Cover (RRP 6-45).
9. Unplug the connector (CN 11) of the Harness DC (PL 20.16.12) from the Motor
Assembly-MD11.
10.
Remove ten screws that secure the Drive Assembly-ELEV, and remove the
Drive Assembly-ELEV .
11.
Remove two screws that secure the Drive Assembly-ELEV, and remove the
Motor Assembly-MD11.
Replacement
1.
Reverse the removal procedure above.
S4525-505
Volume 6 / Finisher - RRPs 6-801