REP 4.6
DEVELOPER MOTOR
PARTS LIST ON PL 4.3
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the following:
a. Print Drum Module.
b. Color Developer Module.
c. Black Developer Module.
d. Right Side Cover (REP 1.3).
e. Top Cover (REP 1.1).
f.
Rear Cover (REP 1.2).
2. Remove
the
Main
Drive
(REP 4.2)
3. Remove the Developer Drive Motor Belts
(REP 4.3)
4. (Figure 1): Disconnect the connector and
remove the Developer Motor.
DocuPrint C55/C55mp/[NC60]
Motor
Belts
Figure 1. Removing the Developer Motor
Developer
Motor
E17
2/99
4-13
REPAIRS/ADJUSTMENTS
REP 4.6