Technical Data Of Inputs And Outputs - Siemens SINAMICS G120X Operating Instructions Manual

Technical data
11.1

Technical data of inputs and outputs

Property
Fieldbus interface (depending
on the Control Unit)
24 V power supply
Output voltages
Setpoint resolution
Digital inputs
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Explanation
PROFINET
USS
PROFIBUS DP
There are two options regarding the 24 V supply:
● The converter generates its 24 V power supply from the line voltage.
● The converter obtains its 24 V power supply via terminals 31 and 32 with 20.4 ... 28.8
VDC. Current consumption: Maximum 0.5A (The current consumption can be higher if
the Control Unit supplies I/O extension module, additional 0.4 A is needed.)
● 24 V (max. 250 mA)
● 10 V (max. 10 mA)
0.01 Hz
6 (DI 0 ... DI 5)
● Electrically isolated
● Type 3 in accordance with EN 61131-2
● Voltage for "low" state: < 5 V
● Voltage for "high" state: > 11 V
● Current for 24 V input voltage: 4 mA
● Minimum current for the "high" state: 2.5 mA
● Maximum input voltage: 30 V
● PNP/NPN switchable
● Compatible to SIMATIC outputs
● 10 ms response time for debounce time p0724 = 0
Additional on FSH,
● Electrically isolated
FSJ:
● Type 3 in accordance with EN 61131-2
4 (DI 0 ... DI 3)
● Voltage for "low" state: < 5 V
● Voltage for "high" state: > 15 V
● Current for 24 V input voltage: 6.4 mA
● Minimum current for the "high" state: 4 mA
● Maximum input voltage: 30 V
11
1081