Removing And Installing Gearbox Housing Cover And 5Th Gear - Skoda Fabia II 2007 Workshop Manual

Mounting sequence ⇒ page 118
4.3

Removing and installing gearbox housing cover and 5th gear

1 - Gearbox housing
❑ is made out of alumini‐
um or magnesium
❑ Assignment ⇒ Electron‐
ic Catalogue of Original
Parts
❑ repairing ⇒ page 126
2 - 5th gear pinion
❑ removing and installing
⇒ page 118
❑ Fitting position
⇒ page 124
3 - Lock washer
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
❑ Determine thickness
⇒ page 125
4 - Gasket
5 - Cover for gearbox housing
Note
If the gearbox housing cover is fitted
with the gearbox mounted, inspect
the gear oil level, if necessary top up
with oil ⇒ page 112
6 - 5 Nm + 90° further
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
7 - Lock washer
❑ always replace ⇒ Elec‐
tronic Catalogue of Original Parts
❑ Determine thickness
8 - 5th gear synchronizer body
❑ with sliding sleeve and stop ring
❑ disassembling and assembling
9 - 5th gear synchronizer ring
10 - 5th gear sliding gear
11 - Needle bearing
❑ 5. gear
❑ replace together with bushing -Pos. 12-
12 - Bushing
❑ for 5th gear needle bearing
❑ replace together with needle bearing -Pos. 11-
❑ press off with bearing support for grooved ball bearing
❑ pressing on ⇒ page 135
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
.
.
⇒ page 125
⇒ page 135
Gearbox 02T - Edition 05.2014
⇒ page 135
4. Disassembling and assembling the gearbox
115