Summary Of Components - Vehicles With Air Conditioning - Skoda FABIA 2000 Workshop Manual

FABIA 2000 1.0/37; 1.4/44; 1.4/50 Engine, Mechanical Components

Summary of components - Vehicles with air conditioning

Note
♦ Mark the rotation direction before removing the V-ribbed belt. Reversing the rotation direction of an already used
belt may destroy it.
♦
Pay attention to the correct position of the ribbed V-belt in the belt pulley when installing it.
1 - Coolant pump
removing and installing
⇒ Chapter 19-2
2 - Lever with tensioner
grease bearing points in
holder before fitting
3 - Bracket
for generator and AC com-
pressor
4 - Gasket
replace
5 - 20 Nm
6 - 10 Nm
7 - Screw
tightening order and tighten-
ing torque ⇒ Fig. 2 in 13-1
page 4
8 - Washer
9 - Screw
tightening order and tighten-
ing torque ⇒ Fig. 2 in 13-1
page 4
coat with -AMV 105 500-
(Loctite 242) before inserting
10 - Bushing
11 - Guide pulley
12 - Washer
Camber towards the outside
13 - 35 Nm
coat with -AMV 200 000-
(Loctite 270) before inserting
14 - Screw
tightening order and tightening torque ⇒ Fig. 2 in 13-1 page 4
15 - Dowel sleeves for AC compressor
must be present in holder ⇒ item 3 in 13-1 page 3
16 - 45 Nm
17 - 25 Nm
18 - Generator
to facilitate the positioning of the generator on the holder drive the bushing of the retaining screw slightly back-
wards
19 - 25 Nm
20 - Belt pulley
for crankshaft
21 - 100 Nm
to release and tighten lock flywheel
♦ Engine removed: with -MP 1-504-
Engine installed: with locking screw ⇒ Chapter 13-2
♦
Edition 02.02
S00.5305.03.20
1 2
13
22
Removing and installing V-ribbed belt
4
3
4
10
11
12
15
14
19
21 20
13
5
6
5
8
7
7
9
8
9
16
17
18
S13-0344
13-1 3
page