Checking Valve Timing - Skoda Octavia III 2013 Workshop Manual

9 - O-ring
❑ replace after removal
10 - Plug
❑ 20 Nm
11 - Idler roller
❑ 45 Nm
12 - Crankshaft - toothed belt sprocket
❑ there must not be any oil present on the contact surface between the toothed belt sprocket and the
crankshaft
❑ can be installed only in one position
Unscrew locking screw "TDC" bore at the cylinder block - tight‐
ening torque
Note
Replace the O-ring if it is damaged.
– Tighten bolts -arrows- to 30 Nm.
2.3

Checking valve timing

Special tools and workshop equipment required
♦ Fixing screw - T10340-
♦ Camshaft clamp - T10494-
♦ Assembly tool - T10487-
♦ Spark plug wrench , e.g. -3122 B-
♦ Release tool - T10527-
♦ Release tool - T10527/1-
Work procedure
– Loosen hose clamps -1-, -2- and remove air guide pipes.
– Expose air guide hoses at the air guide pipe.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
81
2. Toothed belt drive