C H A P T E; Cisco Remote Phy Shelf 7200 Fault Management; Hardware Compatibility Matrix For Cisco Remote Phy Shelf 7200; Information About Fault Management - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

Cisco Remote PHY Shelf 7200 Fault Management

This document describes how to configure the events for fault management on the Cisco Remote PHY Shelf
7200 Software 1.1.
•
•
•
•
•
Hardware Compatibility Matrix for Cisco Remote PHY Shelf
7200
Note Unless otherwise specified, the hardware components introduced in a given Cisco Remote PHY Shelf 7200
Software Release are supported in all subsequent releases.
Table 31: Hardware Compatibility Matrix for the Cisco Remote PHY Shelf 7200
Cisco CMTS Platform
Cisco cBR-8 Converged Broadband Router with
Cisco IOS XE Gibraltar 16.10.1 and Later Releases

Information About Fault Management

Fault management on RPD is required for remote monitoring, detection, diagnosis, reporting, and correcting
the issues.
The Fault management module provides the following support:
Hardware Compatibility Matrix for Cisco Remote PHY Shelf 7200, on page 95
Information About Fault Management, on page 95
How to Configure RPD Events, on page 96
Configuration Examples , on page 99
Feature Information for RPHY Fault Management, on page 99
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
14
C H A P T E R
Cisco Remote PHY Shelf 7200
Cisco Remote PHY Shelf 7200 Software 1.1 and
Later Releases
Cisco Remote PHY Shelf 7200
• PID—HA-RPHY
95