Fine Adjustment Of Black Density - Toshiba e-STUDIO205L Service Handbook

3.6.7

Fine adjustment of black density

The density of black side on scanned image is adjusted at color-scanning.
Code Original mode
1075 Text
1076 Printed Image
1077 Photo
8371 User custom
Note:
Be careful for the value not to be too large since the gradation is reproduced worse in darker
side.
<Procedure>
The procedure is the same as that of
3.6.8 RGB conversion method selection
The color space conversion method of image is decided at color-scanning.
Code Original mode
1080 Text
1081 Printed Image
1082 Photo
8372 User custom
<Procedure>
The procedure is the same as that of
3.6.9 Adjustment of saturation
The saturation of the scanned image is adjusted for color-scanning.
Code Original mode
8325 Text
8326 Printed Image
8327 Photo
8373 User custom
<Procedure>
The procedure is the same as that of
e-STUDIO205L/255/305/355/455
ADJUSTMENT
The larger the value is, the black side of the image becomes darker.
Acceptable values: 0 to 4 (Default: 0)
P.3-32 "3.6.2 Density adjustment".
0: sRGB, 1: AppleRGB, 2: ROMMRGB, 3: AdobeRGB
(Default: 0)
P.3-32 "3.6.2 Density adjustment".
The larger the value is, the brighter the image becomes.
The smaller the value is, the duller the image becomes.
Acceptable values: 0 to 255 (Default: 128)
P.3-32 "3.6.2 Density adjustment".
3 - 36
<Adjustment Mode (05)>
Remarks
<Adjustment Mode (05)>
Remarks
<Adjustment Mode (05)>
Remarks
© 2009 TOSHIBA TEC CORPORATION All rights reserved