Operation Of Bypass Pickup Roller - Toshiba e-STUDIO 5540C Service Manual

[ 2 ] Operation of bypass pickup roller

When the bypass pickup solenoid (SOL8) is turned ON, the plunger is pulled, and then the lever is
rotated. The pickup arm is then brought down with its own weight. When the bypass pickup solenoid
(SOL8) is turned OFF, the pickup arm is brought up by the spring force.
The driving force transmitted through the bypass motor (M12) is transmitted to the bypass feed roller
through the shaft and then to the bypass pickup roller through the timing belt. The roller is rotated by
this driving force.
Bypass motor(M12)
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Bypass pickup solenoid(SOL8)
Bypass paper size detection sensor(S70)
Bypass paper sensor(S71)
Fig. 3-44
3 - 75
Bypass feed roller
Bypass pickup roller
Pickup arm
Bypass separation roller
Bypass transport roller
Bypass feed sensor(S72)
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3