Toshiba e-STUDIO 5540C Service Manual page 130

3.12.2 Composition
Process unit (Y, M, C, K)
Drive section, other
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
Drum cleaner unit Drum
Cleaning blade
Recovery blade
Blade side seal
Toner recovery auger
Main charger unit Main charger grid
Needle electrode
Needle electrode cleaner
Discharge LED
V0 sensor unit Drum surface potential (V0)
sensor
(e-STUDIO6550C/6570C only)
V0 sensor shutter solenoid -K
(e-STUDIO6550C/6570C only)
Drum thermistor-Y, -K
Needle electrode cleaner motor-
K/-C/-M/-Y
Needle electrode cleaner
detection sensor-K/-C/-M/-Y
Main charger ozone exhaust fan-
K/-C/-M/-Y
Auger lock detection sensor
Developer unit Developer material
Auto-toner sensor
Developer sleeve (Magnetic
roller)
Doctor blade
Mixer
Temperature/Humidity sensor
Ozone filter-1, -2
Ozone suctioning fan
High-voltage transformer
Developer unit motor-K/-YMC
Developer unit mixer motor-K/-YMC
Drum motor-K/-YMC
Toner filter
Scattered toner suctioning fan
EPU cooling fan
3 - 82
PM parts
PM parts
PM parts
PM parts
PM parts
ERS-Y, -M, -C, -K
S34
SOL4
THM1, THM2
M23, M24, M25, M26
S30, S31, S32, S33
F17, F18, F19, F20
S42
S26, S27, S28, S29
S12
PM parts
F24
HVT1, HVT2
M29, M31
M30, M32
M27, M28
PM parts
F25
F14
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved