Toshiba e-STUDIO 5540C Service Manual page 101

• When the power is turned ON or tandem LCF drawer is inserted (When the power is turned ON or
The equipment drawers are inserted).
LCF performs initialization.

Detects the presence of paper
Tray-up motor ON - The tray goes up

At this time, the tray-up sensor and LCF empty sensor are OFF.
 When the tray-up sensor is not turned ON within a fixed period of time, it means
that the tray is in an abnormal condition
"Add paper" is displayed regardless of the presence/absence of paper.
 The tray-up sensor is turned ON within a fixed period of time
- The tray-up motor stops.
At this time, if the empty sensor is
• When the paper in the drawer runs short during copying,
 The tray-up sensor is turned OFF.
 The tray-up motor is turned ON. - The tray goes up.
 The tray-up sensor is turned ON.
 The tray-up motor is stopped.
• The empty sensor is turned OFF during copying in spite of the tray-up sensor being ON
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
 Cleared by turning the power ON/OFF
It is judged that there is no paper.
The drawer area of the control panel blinks.
(When the drawer is selected)
The copying operation is stopped.
3 - 53
ON: It is judged that there is paper.
OFF: It is judged that there is no paper.

The drawer area of the control
panel blinks.
(When the drawer is selected)



e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3