Density Adjustment (Black Mode) - Toshiba e-STUDIO351c Service Handbook

3.7.2

Density adjustment (Black Mode)

Adjusts the center density and the variation of density adjustment buttons.
Original mode
Color
mode
Text/Photo
Black 845
855
850
860
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value (acceptable values: 0 to 255).
(To correct the value once keyed in, press the [CLEAR] button.)
(4) Press the [ENTER] or [INTERRUPT] button to store the value in memory.
back to the ready state.
(5) Let the equipment restart and perform scanning job.
(6) If the desired image has not been attained, repeat step (1) to (5).
e-STUDIO281c/351c/451c ADJUSTMENT
Text Photo
846 847
856 857
851 852
861 862
Item to be
adjusted
Manual density The larger the value is, the darker the
center value image becomes.
Acceptable values: 0 to 255
(Default: 128)
Manual density The larger the value is, the darker the
dark step value dark side becomes.
Acceptable values: 0 to 255
(Default: 20)
Manual density The larger the value is, the lighter the
light step value light side becomes.
Acceptable values: 0 to 255
(Default: 20)
Automatic density The larger the value is, the darker the
image becomes.
Acceptable values: 0 to 255
(Default: 128)
3 - 42
<Adjustment Mode (05)>
Remarks
The equipment goes
June 2005 © TOSHIBA TEC