Entry And Exit; Keyless Entry - Subaru CROSSTREK 2021 Getting Started Manual

KEYLESS ENTRY

1 Lock/Arm
• Press the lock/arm button to lock the doors and rear gate
and to activate the security alarm. A chirp sounds and the
hazard warning lights flash once.
• If any of the doors or the rear gate are not fully closed, five
rapid chirps sound and the hazard warning lights will flash
to alert you.
• Press the lock/arm button three times to activate the vehicle
finder function. If you are within 30 feet of your Subaru, the horn
sounds once, and the hazard warning lights flash three times.
2 Unlock/Disarm
• Press the unlock/disarm button once to unlock the driver's
door. To unlock all the doors and the rear gate, briefly press
the button twice. Two chirps sound and the hazard warning
lights flash twice.
• The interior lights will illuminate when you press the
unlock/disarm button if they are set to the "DOOR" position
on the overhead console.
3 Rear Gate
• Press the rear gate button to unlock the rear gate.
4 Panic Alarm
• Press the panic alarm button to sound the horn and flash
the hazard warning lights.
• Press any button on the access key fob or transmitter to
deactivate the panic alarm.
Automatic Door Locking/Unlocking
This feature allows you to set when your Subaru automatically locks or unlocks the doors
through the Combination Meter Display (use the i/Set Switch to navigate to "Vehicle Setting"
then "Auto Door Lock or Unlock"). The available settings are listed in the table below.
AUTO DOOR LOCK
AUTO DOOR UNLOCK
AVAILABLE SETTINGS
Vehicle Speed
(12 mph)
Ignition OFF

ENTRY AND EXIT

Shift into or OFF
out of PARK
Driver's Door Shift into or
Open out of PARK
Transmitter
Access Key Fob
OFF
7