Subaru Legacy 2004 Service Manual page 2663

Hide thumbs Also See for Legacy 2004:

Table of Contents

2) Drive gear

Replace the drive gear when their tooth surface

and shaft are excessively broken or damaged.

3) Measure the clearance between snap ring and

inner race of ball bearing with a thickness gauge.

0.01 — 0.15 mm (0.0004 — 0.0059 in)

If the measurement is not within specification, se-

lect a suitable snap ring and replace it.

Snap ring (Outer-30)

Transfer Drive Gear

Thickness mm (in)

1.53 (0.0602)

1.65 (0.0650)

1.77 (0.0697)

MANUAL TRANSMISSION AND DIFFERENTIAL

Chapters

Table of Contents