[Dc2+Pi] Application Change - SATO CL4NX Programming Reference Manual

[DC2+PI] Application change

Command
Hexadecimal code
Initial Value
Valid range and term of
command
[Function]
This command is used to switch applications such as SBPL and SZPL.
[Format]
DC2 (12H) + PI,aa
[Parameters]
Symbol
aa
[Return data format (normal)]
[ACK]<06>
16
[Return data format (when a command error occurs)]
[NAK]<15>
16
DC2
<12>
16
None
When turning off the power
Valid range
Printer operation in
progress
When acquiring label
sensor information
Error
Others
Parameter name
Identifier
560
PI
<50> <49>
16 16
-
-
The command cannot be received during the printer
operation. ([NAK] return)
Commands are not accepted while acquiring sensor
information. ([NAK] reply)
The command cannot be received while an error is
occurring. ([NAK] return)
Commands cannot be received other than when the
screen is Online or Offline. ([NAK] return)
Valid range
00: AUTO
SB: SBPL
SZ: SZPL
SI: SIPL
SD: SDPL
ST: STCL
SE: SEPL
Parameter
,aa
Acquisition method
Two characters fixed
acquisition