[ESC+BX] DataMatrix (ECC200) (Compatible command)
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying DataMatrix (ECC200).
[Format] (Setup part)
<BX>aabbccddeeefffghh
•
Parameter
a [Format ID]
Valid Range : 01 (Fixed)
b [Error correction level]
Valid Range : 20 (Fixed)
c [Cell width]
Valid Range : 01 to 99 (dot per cell)
d [Cell pitch]
Valid Range : 01 to 99 (dot per cell)
e [Number of cells per line]
Valid Range : 010 to 144
000 : (Auto setup)
f [Number of cell lines]
Valid Range : 008 to 414
000 : (Auto setup)
g [Mirror image]
Valid Range : 0 (Fixed)
h [Size of guide cell]
Valid Range : 01 (Fixed)
[Supplementary Explanation]
•
01 and 02 are designable for [Cell width] and [Cell Pitch]; however, they may not be read
properly. In this case, 00 will be an error.
•
If 000 is specified for both [No. of cells per line] and [Number of cell lines], optimum matrix size
is set automatically based on the Number of data.
[Precautions during use]
•
This is the command of the old specification. Recommend the use of <2D50>.
Parent topic
2D Code
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between
items
315
BX
<42>
<58>
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Parameter
aabbccddeeefffghh