[Dc2+Dg] File Information Acquisition - SATO CL4NX Programming Reference Manual

[DC2+DG] File information acquisition

Command
Hexadecimal code
Initial Value
Valid range and term of
command
[Function]
This command returns the specified file data information.
[Format]
[DC2]DG,aa,b,cccccc,ddddddd
[Parameters]
Symbol
a Language
b File type
c File name size (byte)
d File name
*1 Only the file name is
specified.
DC2
<12>
16
None
When turning off the power
Valid range
Printer operation in
progress
When acquiring label
sensor information
Error
Parameter name
SB: SBPL settings
SZ: SZPL settings
SI: SIPL settings
SD: SDPL settings
ST: STCL settings
0: Font/logo
1: TrueType font
1 to 255
Data including the following character groups
•
•
•
•
•
DG
<44> <47>
16 16
-
-
The command cannot be received during the printer
operation. ([NAK] return)
Commands are not accepted while acquiring sensor
information. ([NAK] reply)
The command can be received even if an error is
occurring.
Valid range
Alphabet
Numeral
Hyphen ("-")
Underscore ("_")
Period (".")
606
Parameter
,aa,b,cccccc,ddddddd
Acquisition method
Two characters fixed
acquisition
One character fixed
acquisition
Acquired up to ","
Acquired up to the file
name size