SATO CL4NX Programming Reference Manual page 572

[Return data]
Symbol
a Total number of data byte
* This is the total number of bytes after
parameter b. The delimiting comma between
parameters a and b, and the ETX are not
included.
* Data input and output form is which case of
ASCII or HEX, but, as for the unit, the value
becomes same for a byte.
b Memory data
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Exception processing]
Parameter name
Identifier
Terminology
Command error
[Coding sample]
[DC2]PJ,H1,AS
* As for the identifier, two or more specification is possible excluding HA.
[DC2]PJ,H1,H2,AS
[DC2]PJ,H1,H2,H3,AS (Equal to [DC2]PJ,HA,AS)
[Return status format]
Current inlet type ＋","＋ RFID data
Current inlet type
RFID data
[Data format of RFID data]
• When the command is issued specifying "H1" (user data) for the identifier
cc:d･･･d,e･･･ e
Symbol
c Identifier
Parameter name
Command error
The data received after a command error is determined is not considered as a
parameter of this command.
02: ICODE
03: Tag-it
05: my-d
06: RFID tag none/reading error
Refer to [Data format of RFID data] below.
Parameter name
UD: USER data (ASCII)
ud: USER data (HEX)
Data size from the first memory data item until
before [ETX]
Maximum 4 digits
Refer to [Return status format] below.
Exception condition
A value outside the range is specified
Description
Description
Description
570
Valid range