[Esc+&S] Form Overlay Registration - SATO CL4NX Programming Reference Manual

[ESC+&S] Form Overlay Registration
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the registration of fixed print contents to a memory card.
[Format]
<&S>,aa(,bbbb,ccccc)
• Parameter
a [Registration No.] = Valid range: 1 to 99
b [Size specification of window width] = Valid range: Refer to the table below (omissible).
c [Size specification of window height] = Valid range: Refer to the table below (omissible).
[Coding Example]
<A>
<V>100<H>100<X21>,MODEL
<CC>1
<&S>,1
<Z>
[Supplementary Explanation]
• Specify slot No. with Card Slot for Use <CC> prior to this command <&S> by all means.
• Delimit Start of Data Transmission <A> and End of Data Transmission <Z> with the format to be
registered.
• Registration of identical registration No. is invalid.
• Both Print of Graphic <G> and Print of BMP File <GM> can be registered.
• This command <&S> allows up to 99 registries. Note that the capacity of registry may vary
depending on the memory card to be used.
• Data registered with this command <&S> can be cleared with Clear <*>R.
• The error occurs when specifying unused or specifying the slot which the printer is allocated.
[Note]
• Do not turn the printer's power off when accessing to the memory. When the printer power is off
while memory accessing, the data in the accessed media may be corrupted.
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
376
&S
<26> <53>
16 16
The registered data becomes valid.
The registered data is valid until the next specification is
made.
The registered data is valid until the next specification is
made.
Parameter
,aa(,bbbb,ccccc)