SATO CL4NX Programming Reference Manual page 609

[Return data format (normal, data exists)]
[STX]a...a,b...b[ETX]
Symbol
a Total number of data byte
* This is the total number of bytes after parameter b.
The delimiting comma between parameters a and b,
and the ETX are not included.
d File data
[Return data format (normal, no data)]
[STX]0[ETX]
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Exception processing]
Parameter name
Language
File type
File name size
File name
Terminology
Command error
Invalid receive data
[Supplemental explanation]
• When a file name is bigger than the size of the file name and still the file name is valid, it
operates and finishes normally.
• When you specify SZPL for "Parameter a: Language", "0:Font/logo", "1:TrueType font" settings
of "Parameter b: File type" will be ignored.
Parameter name
A value outside
the range
is specified
Command error Invalid receive data
Command error Command error
Command error Excessively small: Command error, Excessively large:
Remaining data standby
Command error Excessively small: Remaining data standby, Excessively large:
Command error
The file name list is not returned. The data received after a command error is
determined is not considered as a parameter of this command.
The subsequent data is ignored.
607
Data size from the first identifier until before
[ETX]
Exception condition
The specified size and received size are different
Description
Valid range