[Dc2+Pc] Printer Device Information Acquisition - SATO CL4NX Programming Reference Manual

[DC2+PC] Printer device information acquisition

Command
Hexadecimal code
Initial Value
Valid range and term of
command
[Function]
This command returns the printer device information.
[Format]
DC2 (12H) + PC
[Return data format (normal)]
[STX]a...a,b...b:c...c[CR][LF](d...d:e...e[CR][LF]) ... [ETX]
[Return data]
Symbol
a
b(d)
c(e)
Data Example)
[STX]12345,MODEL: Model name[CR][LF]FW Ver:1.0.0[CR][LF]...[CR][LF] [ETX]
[Printer device information list]
No.
1 Model name
2 Kernel version
DC2
<12>
16
None
When turning off the power
Valid range
Printer operation in
progress
When acquiring label
sensor information
Error
Parameter name
Total number of data byte
* This is the total number of bytes after parameter
b. The delimiting comma between parameters a
and b, and the ETX are not included.
Device information name
* Text format
Device information data
* Text format
Description
MODEL
KERNEL Ver
PC
<50> <43>
16 16
-
-
The command can be received even during the printer
operation.
Commands are not accepted while acquiring sensor
information. ([NAK] reply)
The command can be received even if an error is
occurring.
Data size from the first device information
name up to before [ETX]
Refer to the printer device information list.
Refer to the printer device information list.
Device information name
547
Parameter
None
Valid range
Device information data
M...M
M: Model name
R...R
R: OS release number