[Esc+/S] Set Print Template Name - SATO CL4NX Programming Reference Manual

[ESC+/S] Set Print Template Name

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
To change the print template name that is already registered inside the printer memory.
[Format]
</S>,aaa,n~n
• Parameter
aaa [Print template format number]
n~n [Print template name]
[Coding Example]
Change Print Template with the template name "SATO Barcode".
<A>
<CC>1
</S>,001,SATO Barcode
<Z>
[Supplementary Explanation]
• To avoid incorrect response from printer, this command should not use in conjunction with other
commands.
• Only first 32 characters of the print template name will be registered into the printer memory.
• The character "," (HEX: 2C) is not allowed in template name registration.
• Printer will return "ACK" back to host PC if operation success, else printer will return "NAK" to
the host PC if operation fail.
• If the parameter "aaa" is not assigned, </S> command will be ignored.
Parent topic XML Command
ESC /S
<1B> <2F>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
= Valid range (Template name) : 1 to 32 ASCII characters
Parameter
< 53> ,aaa,n~n
16 16
The set parameter is maintained.
The set parameter is invalid until the next valid setting.
The set parameter is invalid until the next valid setting.
= 001 - 999
515