[Esc+#E] Print Darkness (Compatible Command) - SATO CL4NX Programming Reference Manual

[ESC+#E] Print Darkness (Compatible command)

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifies print darkness.
[Format]
<#E>ab
• Parameter
a [Print darkness level specification]
1 ↑ Lightest
2
3
4
5 ↓ Darkest
b [Print darkness specification]
A to F (omissible)
This parameter is usually "A".
The parameter valid range differs depending on the model. (Refer to the table below)
[Coding Example]
<A>
<#E>3A
<Z>
[Supplementary Explanation]
• Print darkness value specified by the command.
[Notes]
• This command is for the compatibility with previous one. The print darkness level obtained by
DC2+PB, and the print darkness level on the display screen becomes twice the value set by this
command. (CL4NX)
• Darkness levels 1, 2 and 3 will be 1, 5 and 10 each in CL6NX.
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
329
#E
<23> <45>
16 16
The set parameter is maintained.
The set parameter is valid until the next valid setting.
The set parameter is valid until the next valid setting.
Parameter
ab