[Dc2+Dh] File Deletion - SATO CL4NX Programming Reference Manual

[DC2+DH] File deletion

Command
Hexadecimal code
Initial Value
Valid range and term of
command
[Function]
This command is used to delete the registered files.
[Format]
[DC2]DH,aa,b,c(,ddddd,eeeee)
[Parameters]
Symbol
a Language
b File type
c Deletion type
d File name size (byte)
e File name
* Only the file name is
specified.
[Return data format (normal)]
[ACK]<06>
16
[Return data format (when a command error occurs)]
DC2
<12>
16
None
When turning off the power
Valid range
Printer operation in
progress
When acquiring label
sensor information
Error
Parameter name
SB: SBPL settings
SZ: SZPL settings
SI: SIPL settings
SD: SDPL settings
ST: STCL settings
0: Font/logo
1: TrueType font
0: File specification
1: All files
1 to 255
Data including the following character groups
•
•
•
•
•
DH
<44> <48>
16 16
-
-
The command cannot be received during the printer
operation. ([NAK] return)
Commands are not accepted while acquiring sensor
information. ([NAK] reply)
The command can be received even if an error is
occurring.
Valid range
Alphabet
Numeral
Hyphen ("-")
Underscore ("_")
Period (".")
609
Parameter
aa,b,c(,ddddd,eeeee)
Acquisition method
Two characters fixed
acquisition
One character fixed
acquisition
One character fixed
acquisition
Acquired up to ","
Acquired up to the file
name size