Caution - SATO CL4NX Programming Reference Manual

Caution

• Please mind the following items when using READY/BUSY control.
Make sure the printer is powered when sending print data from host.
• "Receive buffer full" error will occur if you send data larger than receive buffer size (2.95 MB)
using XON/XOFF, Status3, Status4 and Status5. Make sure to send data equal to or less than
2.9 MB and send data while monitoring printer status.
• Parity error is detected when parity error occurred after receiving ESC+A.
Parent topic RS-232C
666