[Coding Example 3]
MicroQR, Error correction: L, Cell size font: 05, Manual setting, Version M3
<A>
<V>100<H>100 <2D32>,L,05,0
<QV>3
<DN>005,01234
<Q>1
<Z>
[Supplemental Explanation]
•
MODEL 1: up to 14, MODEL 2 up to 40, MicroQR: up to 4
The valid parameter range is from 0 to 40 and it varies depending on the QR code type.
•
For MicroQR, 1 to 4 correspond with M1 to M4.
•
Specifying <QV> 0 becomes Auto (Default: Compatible with the existing code).
•
Sending the data exceeding the data size of specified version will result in error and QR code
will not be printed.
•
Specify the <QV> command in between <2Dxx> and <DN>/<DS>.
•
It does not affect other than QR code.
•
When resulted in a parameter error, it will be handled in the same manner of no specification.
[About the version]
Refer to the specifications of QR code for details.
Refer to the QR code specification for details. Version 1: 21 x 21 cell, Version 2: 25 x 25 cell, ...,
Version 40: 177 x 177 cell.
For MicroQR, M1 to M4 = 11 x 11 to 17 x 17 cell, smaller than MODEL 1/2.
Parent topic
2D Code
320