SATO CL4NX Programming Reference Manual page 554

[Precautions during use]
• The printer device information update cycle must be five seconds or longer. When sending this
command in continuation, be sure to set an interval of five seconds or more.
• When a USB memory is used, only the available space of the memory connected first is
returned even when a connection is established via the HUB.
• It takes more than one second to create the return data immediately after the startup in order to
obtain the checksum of the module.
• It takes more time to create the return data when there are a lot of registrations by SBPL
command. (It takes approx. 1.5 seconds to register 10,000 data.)
Host
STX + a...a,b...b:c...c[CR][LF](d...d:e...e[CR][LF]) ... + ETX
Parent topic Common commands for all languages
DC2 + PC
552
This product