[Esc+~A] Cut Number Unit - SATO CL4NX Programming Reference Manual

[ESC+~A] Cut Number Unit

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Cuts labels at a specified interval in a print job.
[Format]
<~A>aaaa
• Parameter
a [Number of labels between each cut] = Valid range : 0 to 9999
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABC
<~A>2
<Q>7
<Z>
2 pcs
[Supplementary Explanation]
• Valid only for cutter models.
• If the parameter is not specified by this command <~A>, each label will be cut after being
printed.
• In case the parameter "a" is set to 0, no label will be cut.
• Set this command before <Q> command.
• This command may not be used in combination with other cut commands <~>.
Parent topic System Command
ESC
<1B>
16
aaaa=1
When the power is OFF
Valid range within items
Valid range between
items
Cut Cut
7 pcs
Feed direction
~A
<7E> <41>
16 16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next
item <A>.
1 label left
Cut Cut
343
Parameter
aaaa