[Esc+Rf] Recall Font & Logo - SATO CL4NX Programming Reference Manual

[ESC+RF] Recall Font & Logo
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Invoking and printing the font and logo downloaded with exclusive tool.
[Format]
<RF>aabbbb,n...n
• Parameter
a [Font ID number] = Valid range: 01 to 99
b [Print digit] = Valid range: 1 to 9999
c [Print data] = data
[Coding Example 1]
To print [AB] in half size character with this command [Font ID No.: 01, Print digit: 4]
(Unicode は A: <0041>
<A>
<PS>
<V>100<H>100<L>0101
<RF>010004,<0041>
<Z>
[Coding Example 2]
When calling and printing logo [Font ID No.: 02 Print digit: 2]
<A>
<V>100<H>100<L>0101<RF>020002,<826B>
<Z>
[Supplementary Explanation]
• Specify the value of print data putting Unicode(UTF-16BE).
• When calling and printing logo, specify [Print digit: 0002], [Print data: <826B>
Note that <826B>
• For [Print Data] parameter, the byte order changes depending on compatibility settings for Font/
Logo call.
◦ Specify little endian when compatibility settings are enabled.
e.g.) Specify <4100> for character "A".
◦ Specify big endian when compatibility settings are disabled.
e.g.) Specify <0041> for character "A".
Parent topic Modification Command
ESC
<1B>
16
aa=01, bbbb=1
When the power is OFF
Valid range within items
Valid range between items
B: <0042> )
16 16
<0042>
16 16
is the value of Shift JIS code of L.
16
61
RF
<52> <46>
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
16
Parameter
aabbbb,n...n
].
16