SATO CL4NX Programming Reference Manual page 563

[Exception processing]
Parameter name
Identifier
Terminology
Command error
Invalid receive data
[Supplemental explanation]
• Setting value of the printer will be switched when switching the application. So, obtaining and
saving the setting of the application before switching, then switching it, and then put it back
to the original application, after that set it by previously saved settings, and it performs the
operation before switching it.
e.g.) When switching the application such as SBPL -> STCL -> SBPL
1. Obtain and save the setting value of SBPL state (obtain the setting value by AIOT,
[DC2]PB[EOT] and so on).
2. Switch the application to STCL.
3. Switch the application to SBPL.
4. Set the setting value obtained and saved in the step 1).
• Please send this command in a state which the printer is not working anything in Offline or
Online standby state waiting state.
The result of this command sent in pause status during cancellation is not guaranteed. In such
case, restart the printer.
• AUTO mode will not be available unless you reboot after switching to AUTO mode. The printer
works with the application before the change until it reboots.
Host
Parent topic Common commands for all languages
Command error
The data received after a command error is determined is not considered as a
parameter of this command.
The data corresponding to Byte 2 and thereafter of the identifier is ignored.
DC2+PI,aa
ACK/NAK (when a command error occurs)
Exception condition
A value outside the
range is specified
Description
This product
561
The specified size and
received size are different
Invalid receive data