SATO CL4NX Programming Reference Manual page 248

[Supplementary Explanation3]
• Parameter part to be followed by Data part. Data part and data part should be specified in a row.
When do not specify in a row, print result may not be secured.
Micro QR Code Data size list
Version
M1 (11x11)
M2 (13x13)
M3 (15x15)
M4 (17x17)
[Coding Example 3]
Error correction level: 7%, Size of one side of cell: 05, Data setup mode: Manual setup,
Concatenation mode: Normal, printed in version M4
<A>
<V>100<H>200<2D32>,L,05,0,0
<QV>4
<DS>1,012345
<DN>0004,6789
<Q>1
<Z>
[Supplementary Explanation4]
• Specify <QV> command between <2Dxx> and <DN>/<DS>.
• When resulted in a parameter error, it will be handled in the same manner of no specification.
• It does not become a parameter error from 00 to 40 (Set the value within the range
corresponding to each model).
For MicroQR, the setting range is from 00 to 04.
• Sending the data exceeding the data size of specified version will result in error and QR code is
not printed.
Error correction Numeric
L (Error detection 5
only)
L 10
M 8
L 23
M 18
L 35
M 30
Q 21
Alphanumeric
-
6
5
14
11
21
18
13
246
Kanji Binary
- -
- -
- -
6 9
4 7
9 15
8 13
5 9