Status3 Return; Connection Diagram; I/O Signal - SATO CL4NX Programming Reference Manual

Status3 return

The purpose of this communication protocol is to control printer status in the host. With the request
command from the host, the printer returns the status.
After receiving the request command, the status is immediately returned.
In this communication protocol, receive mode is set to multiple buffer.

Connection diagram

I/O signal

Timing chart
Parent topic RS-232C
Connection diagram
1)DB-9P
Printer
RD 2
SD 3
SG 5
Parent topic Status3 return
I/O signal
Pin No.
2 RD
3 SD
5 SG
Parent topic Status3 return
Host
3
2
5
Signal I/O
Input
Output
-
SD
RD
SG
Data transferred from the host to the printer
Data transferred from the printer to the host
Signal ground
663
Description