Switching LAN and WLAN
This feature switches LAN and WLAN so that LAN can be used while the WLAN unit is connected.
Select the interface from Interface > Network > Interface on LCD.
There are 3 options to select from as below.
AUTO
LAN
Wi-Fi
When the settings are changed, they will be enabled from the next time the printer restarts.
It is also possible to implement from DC2 command separately from LCD. (See Command
Specification document for details)
(Restrictions)
•
The settings will automatically be switched to "AUTO" if you start up the printer after detaching
the WLAN unit with the settings set to "Wi-Fi".
Parent topic
LAN/Wireless LAN
Item
LAN is enabled when LAN cable is connected at printer startup. WLAN
will be enabled if printer detects that it isn't connected.
Enables LAN and disables WLAN.
Enables WLAN and disables LAN.
Description
708