SATO CL4NX Programming Reference Manual page 587

Symbol
b Memory data
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Exception processing]
Parameter name
Identifier
Terminology
Command error
[Coding sample]
[DC2]PJ,F1,AS
* As for the identifier, two or more specification is possible excluding FA.
[DC2]PJ,F1,F2,AS (Equal to [DC2]PJ,FA,AS)
[Return status format]
Current inlet type + "," + RFID data
Current inlet type
RFID data
[Data format of RFID data]
• When the command is issued specifying "F1" (user data) for the identifier
cc:d･･･d,e･･･ e
Symbol
c
d
e
• When the command is issued specifying "F2" (ID data) for the identifier
cc:e...e,ff:h...h,ii:k...k
Symbol
c / f / i
Parameter name
Command error
The data received after a command error is determined is not considered as a
parameter of this command.
04: FeliCa Lite/FeliCa Lite-S
06: RFID tag none/reading error
Refer to [Data format of RFID data] below.
Parameter name
Identifier
Bytes of data
Data
Parameter name
Identifier
Refer to [Return status format] below.
Exception condition
A value outside the range is specified
Description
Description
UD: USER data (ASCII)
ud: USER data (HEX)
Data input and output form is which case of ASCII or
HEX, but, as for the unit, the value becomes same for a
byte.
Refer to [Maximum return data] below.
DM: IDm
PM: PMm
ID: ID Block
585
Valid range
Description
Description