[Esc+&R] Form Overlay Call - SATO CL4NX Programming Reference Manual

[ESC+&R] Form Overlay Call
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Invoking the contents in memory card with Registration of Form Overlay <&S>.
[Format]
<&R>,aa
• Parameter
a [Registration Number] = Valid Range : 1 to 99
[Coding Example]
<A>
<CC>1
<&R>,1
<Z>
[Supplementary Explanation]
• Specify slot number of Card Slot for Use <CC> prior to this command <&R> by all means.
• This command can be combined with different registration No. and printed.
• When registration No. is not specified, this command will be ignored.
• If specifying unregistered No., Read/Write error will occur.
• When registering without specifying window, Vertical Print Position <V> and Horizontal Print
Position <H> will be ignored and V1 and H1 (Start position of drawing area) will be determined.
• When specifying and registering window, movement with <V> and <H> will be enabled.
Note that when exceeding print area, the portion outside of print area will not be printed.
• Please note that this command cannot be used without a memory card.
• The error occurs when specifying unused or specifying the slot which the printer is allocated.
[Note]
• Do not turn the printer's power off when accessing to the memory. When the printer power is off
while memory accessing, the data in the accessed media may be corrupted.
[Valid Commands]
Print position <V>
Parent topic Memory Card Command
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
<H>
379
&R
<26> <52>
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Parameter
,aa