Cleaning Interval; Change Printhead - SATO CL4NX Operator's Manual

4 Operation and Configuration
Clean Printhead
System > Notifications > Clean Printhead > Clean Printhead
Set whether or not to enable the notification function about the cleaning
timing of the print head.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.

Cleaning Interval

System > Notifications > Clean Printhead > Cleaning Interval
Set the notification interval about the cleaning timing of the print head.
Available to change if you have selected Enabled in Clean Printhead
menu
The printer shows the print distance as the setting value.
The setting range is 0 to 999 m.
Note:
You can disable the notification function if you set to 0.

Change Printhead

System > Notifications > Change Printhead
Notify the replacement timing of the print head.
The setting items are as follows:
1 Change Printhead
2 Printhead Interval
3 Printhead Count
142
CL4NX Operator Manual
Set whether or not to enable the notification
function about the replacement timing of the
print head.
Set the notification interval about the replace-
ment timing of the print head.
Shows the current print distance.